Wardrobe Door Latching:  The latching mechanism shall be finger lift control type constructed of 14 gauge (minimum) steel with a nylon cover that has a generous finger pull.  Spring activated nylon slide latches shall be completely enclosed in the lock channel allowing doors to close with the lock in the locked position.  Locking devise shall be designed for use with either built-in combination locks or padlocks.  Latch hooks shall be 12 gauge (minimum) and shall be MIG welded to vertical frame member.  Provide three latch hooks for doors 48" and over and two for doors under 48". Denver Lockers
Seamless Drawn Stainless Steel Recessed Locker Handle:  All wardrobe doors shall have a seamless drawn stainless steel recessed handle shaped to receive a padlock or built-in combination lock.  The recess pan shall be deep enough to have the lock be completely flush with the outer door face.  A finger lift/padlock hasp shall protrude through the top of the handle for easy opening of the locker door.
Terry, there are many storage unit places closer to the airport, but then of course you'd have to rent a car. DIA Self Storage, for example, is less than 10 miles away. You can google map Denver International Airport, then "search nearby" for "self storage units" if you think that's something you might want to do. http://www.coloradoselfstorage.com/

Lockers Denver Co 80216


It isn't complicated. He admits he knew the brakes were out, refused to use the runaway ramp (or because he doesn't know English, didn't know to use it....and should NEVER have been able to pass a CDL test anyway) and was therefore reckless. He also said he didn't want to roll the truck in the ditch, and therefore drove into parked traffic. He was more worried about his own life and his truck/load (was lumber the only thing in that truck or was he transporting something illegal that he didn't want found if he did take the runaway ramp?) than he was about human beings stopped on the interstate in front of him! I am fine with immigrants coming to this country to work toward a better life, but when their inability to speak/read English could put lives at risk, they darn-well better not be hired for jobs over English speaking citizens! Denver Lockers
Salsbury metal lockers are made of powder coat steel for long lasting durability and corrosion resistance. Units include recessed lift handle and hasp, and can accommodate combination or key locks for anti-theft protection. Available assembled or unassembled. Available types are Single Tier, Double Tier, Triple Tier, Four Tier, Five Tier, Six Tier and 16 Person. Groups are 1 Wide and 3 Wide. Openings range from 1 to 18. Colors are Blue, Gray and Tan. Dimensions vary per model. Lockers Denver Colorado
Penco storage lockers ensure secure, reliable and quiet operation. These steel lockers feature a tamper-proof chrome plated lathing pull handle that offers smooth one-handed fingertip operation. Metal storage lockers include right-hand butt hinges recessed into the doorframe to prevent forceful entry or tampering. Locker doors feature mortis and tenon construction with spot welding for rigidity. Continuous door strike ensures secure closure. Door strikes are padded to dampen noise. Latching channels have nylon glides to reduce sound when opening or closing. Legs add 6" to height. Single Tier School Lockers have 3-point latching (top, bottom and sides); 18"D Lockers include coat hooks and coat rod. Double Tier and Triple Tier Storage Lockers have 2-point latching (top and bottom) Includes coat hook. Two Person Lockers include coat rod on 18" and 21" deep lockers; Coat hooks on 15"deep. Lower door controls operation of one 9-1/2"H upper compartment. Six Tier Box Lockers have friction latch and hasp (padlocks sold separately). 16 Person Lockers include sixteen 12"W x 18"D x 12"H compartments and a center coat rod. It's recommended to anchor lockers to floor and/or wall for safety. Powder coat finish available in the following colors: Gray, Champagne, Marine Blue, or Burgundy. Lockers Denver Colorado
×